On Sale

AUDAXPRO: ONE 15

RM1,868.00
MYR

Product Highlight

  • 20% Off

Description

ONE is a buoyancy compensator that represents the perfect balance between quality, performance and price. ONE has been designed as a recreational BCD but some of its versions are perfect to face also more challenging immersions.

The preformed harness of this great scuba buoyancy compensator is entirely made of cordura 1000 and padded with 2,5-mm pre-compressed expanded polystyrene. It is possible to adjust its height with the 2 stainless steel back buckles placed on its anatomical shoulder straps.

The harness and the anatomical shoulder straps are blocked and adjustable through 2 stainless steel back buckles and fixed with Velcro. You can fasten and unfasten the jacket shoulder straps through 2 50-mm nylon fasteners.

There are two 50-mm stainless steel D-rings, which are sewn, thus the shoulder straps cannot be adjusted. Moreover, the 2 anatomical shoulder straps have 2 stainless steel little rings each, which help adjusting the breast line. In the part adjacent to the bladder, you can find a HT polyester strip vertically placed at the harness centre, where there are also 3 stainless steel grommets (2 in the higher part and 1 in the lower part). Right and left to the central strip there are 2 other strips divided by steams. These ones are meant to pass through the 4 bladder cuts and through the harness slots fixing the tank.

On the big strips of the diving BC, there are 2 non-slip rubber grips for the tank. If needed, you can replace the ventral belt placing 2 rectangular 50-mm nylon rings, which are in the lower part of the harness, at the ventral part level. There are 4 stainless steel D-rings, 2 22-mm and 2 50-mm D-rings to fix the accessories.

The harness is equipped with a HT polyester handle to carry the jacket inside water or on board. To make your diving experience more comfortable, this scuba BCD has an anatomical padding with an inner pocket to keep the lift bag or the signal tube. The padding is fixed to the harness with 4 stainless steel screws. A rectangular 50-mm nylon ring, placed centrally in the lower part of the harness, is used to fix  the inguinal belt, which can be adjusted through a 50-mm nylon back buckle. A stainless steel back buckle allows closing the ventral belt.

On Sale

AUDAXPRO: ONE 15

RM1,868.00
MYR

Product Highlight

  • 20% Off

Description

ONE is a buoyancy compensator that represents the perfect balance between quality, performance and price. ONE has been designed as a recreational BCD but some of its versions are perfect to face also more challenging immersions.

The preformed harness of this great scuba buoyancy compensator is entirely made of cordura 1000 and padded with 2,5-mm pre-compressed expanded polystyrene. It is possible to adjust its height with the 2 stainless steel back buckles placed on its anatomical shoulder straps.

The harness and the anatomical shoulder straps are blocked and adjustable through 2 stainless steel back buckles and fixed with Velcro. You can fasten and unfasten the jacket shoulder straps through 2 50-mm nylon fasteners.

There are two 50-mm stainless steel D-rings, which are sewn, thus the shoulder straps cannot be adjusted. Moreover, the 2 anatomical shoulder straps have 2 stainless steel little rings each, which help adjusting the breast line. In the part adjacent to the bladder, you can find a HT polyester strip vertically placed at the harness centre, where there are also 3 stainless steel grommets (2 in the higher part and 1 in the lower part). Right and left to the central strip there are 2 other strips divided by steams. These ones are meant to pass through the 4 bladder cuts and through the harness slots fixing the tank.

On the big strips of the diving BC, there are 2 non-slip rubber grips for the tank. If needed, you can replace the ventral belt placing 2 rectangular 50-mm nylon rings, which are in the lower part of the harness, at the ventral part level. There are 4 stainless steel D-rings, 2 22-mm and 2 50-mm D-rings to fix the accessories.

The harness is equipped with a HT polyester handle to carry the jacket inside water or on board. To make your diving experience more comfortable, this scuba BCD has an anatomical padding with an inner pocket to keep the lift bag or the signal tube. The padding is fixed to the harness with 4 stainless steel screws. A rectangular 50-mm nylon ring, placed centrally in the lower part of the harness, is used to fix  the inguinal belt, which can be adjusted through a 50-mm nylon back buckle. A stainless steel back buckle allows closing the ventral belt.